Toys | Aircraft pilot dolphin 71 with remote control
Ref.: 832132
Location
Mburucuya
Published
26/04/2023
Details
Designed as a perfect first jet coach or simply your acrobatic jet easy to handle every day carefree.
Easily reparable wood design with a simple and well-known construction method and simple equipment, simply place the equipment and fly!
CHARACTERISTICS:
Construction of wood with genuine Oracover coating (Ultracote)
Strong, light and easily repairable construction methods.
Two-piece wing and two-piece stabilizer, all to facilitate transport
Pre-installed (small and fixed)
Servo gear doors operated
Optional LED lights set
HARDWARE INCLUDED:
Full air frame (including aluminium wing tubes and fiberglass control horns)
Electric pilot-RC retractiles and electric brakes.
Double-wall exhaust tube (for 60N turbines)
Fuel tank and fuel pipe previously prepared, fuel point and ventilation valve
UAT air trap
Push rods prepared with ball links
HARDWARE REQUERED:
Turbine: 60N
Servos: 8 // Use x1 per aleron, x1 per flap, x1 per elevator, x1 in rudder and x1 for direction
It also requires all the usual accessories such as transmitter, receiver, batteries, powerbox and possibly other small accessories.
CONSTRUIR INFORMATION:
The aleron is 18 up and down, the elevator is 18 up and 15 down, Flap maximum of 36 degrees down, 25 rudder in both directions.
The Flap / Elevator / Aileron mix is a 36-degree fin with a 2.5-degree descending lift and an upward 16-degree alloy for landing.
The Flap / Elevator mix is a 25-degree flap with a maximum of 1.5 degrees down for takeoff. for the opening flight do not use the flap to take off.
The CG is 205 mm from the front attack edge at the root of the wing.
SPECIFICATIONS:
Model: Dolphin
Scope: 72 (1,850 mm)
Length: 71 (1,800 mm)
Wing area: 972 "2 (6,270 cm2)
Weight: 16.7 pounds (7.6 kg)
Included invoice and VAT.
1 year warranty by factory defects.
Prices may vary at any time, check before making your purchase.
We have funding plans for 6 to 24 months.
Delivery will take place at an estimated time of 24 to 48 hours from the time of the purchase confirmation.
Inland shipping, with additional cost depending on the destination.
The images are reference, it can vary from the actual product.
Product subject to availability.
Easily reparable wood design with a simple and well-known construction method and simple equipment, simply place the equipment and fly!
CHARACTERISTICS:
Construction of wood with genuine Oracover coating (Ultracote)
Strong, light and easily repairable construction methods.
Two-piece wing and two-piece stabilizer, all to facilitate transport
Pre-installed (small and fixed)
Servo gear doors operated
Optional LED lights set
HARDWARE INCLUDED:
Full air frame (including aluminium wing tubes and fiberglass control horns)
Electric pilot-RC retractiles and electric brakes.
Double-wall exhaust tube (for 60N turbines)
Fuel tank and fuel pipe previously prepared, fuel point and ventilation valve
UAT air trap
Push rods prepared with ball links
HARDWARE REQUERED:
Turbine: 60N
Servos: 8 // Use x1 per aleron, x1 per flap, x1 per elevator, x1 in rudder and x1 for direction
It also requires all the usual accessories such as transmitter, receiver, batteries, powerbox and possibly other small accessories.
CONSTRUIR INFORMATION:
The aleron is 18 up and down, the elevator is 18 up and 15 down, Flap maximum of 36 degrees down, 25 rudder in both directions.
The Flap / Elevator / Aileron mix is a 36-degree fin with a 2.5-degree descending lift and an upward 16-degree alloy for landing.
The Flap / Elevator mix is a 25-degree flap with a maximum of 1.5 degrees down for takeoff. for the opening flight do not use the flap to take off.
The CG is 205 mm from the front attack edge at the root of the wing.
SPECIFICATIONS:
Model: Dolphin
Scope: 72 (1,850 mm)
Length: 71 (1,800 mm)
Wing area: 972 "2 (6,270 cm2)
Weight: 16.7 pounds (7.6 kg)
Included invoice and VAT.
1 year warranty by factory defects.
Prices may vary at any time, check before making your purchase.
We have funding plans for 6 to 24 months.
Delivery will take place at an estimated time of 24 to 48 hours from the time of the purchase confirmation.
Inland shipping, with additional cost depending on the destination.
The images are reference, it can vary from the actual product.
Product subject to availability.